Auto Installation and Configuring of vSphere ESXi 5

Published by Christian Mohn · Read in about 2 min (256 words)

One of the last projects I’ve been involved with at Seatrans, is to automate the installation and configuration of vSphere ESXi 5 hosts for deployment on vessels. I’ve talked a bit about this before, both on vSoup and in Setting Up Automated ESXi Deployments where I outlined my PXE and PowerCLI based installation and configuration scheme. Not much has changed since then, except updating the PXE server to offer ESXi 5, instead of ESXi 4 and a lot of work has been put into the scripting, including a front-end GUI for the PowerCLI script itself. The end “product” is now in place for mass deployments for internal use.

The following video shows how the PXE based installation works, as well as a run through the now GUI based configuration tool aptly called Seatrans Hypervisor Installation Tool.

The video jumps a bit between two VMs, one running Windows Server 2008 R2, that runs the DHCP/PXE services and the PowerCLI script, and one that gets ESXi installed and configured:

This goes to show that you can create your own, specialized and portable deployment solution without requiring elaborate network configurations or reconfiguring of existing infrastructure.

Note: I will not be providing downloadable versions of the final script at this time. The reason for this is quite simple, it’s very specific and tailored for a non-generic environment. If I can manage to find the time, I’ll post a generic version later but in order for anyone else to utilize the PowerCLI scripts I’ve created, a lot of work is required.

Post last updated on January 2, 2024: Add author

About

vNinja.net is the digital home of Christian Mohn and Stine Elise Larsen.

The primary focus is on IT architecture and data center technologies like virtualization and related topics, but other content also pops up from time to time.

Sponsors